OS/2
OS/2 Warp Merlin MCP eComStation ArcaOS
IBM OS/2 Developer's Toolkit Version 4.5
PMShell
0
17,883
2019.05.23 14:40
Modificationa made by Serenity Systems: * Replaced the Toolkit installer from IBM, so the toolkit can also be uninstalled. Other improvements also added by making more options optional to install. * Put emitc.dll in from the Warp 4.0 toolkit. The newer version does not work correctly. * Updated RC.EXE * To report bugs goto www.ecomstation.com and login. Use the bugtracker to report bugs. _______________________________________________________________________________ README - IBM OS/2 DEVELOPER'S TOOLKIT VERSION 4.5.2. _______________________________________________________________________________ Welcome to the IBM OS/2 Developer's Toolkit Version 4.5.2. (hereafter referred to as the Toolkit). In addition to this README, the "Using Your Toolkit" online book (located in the "book" subdirectory) is included to help you: - See what is new and what has changed in the Toolkit - Become familiar with the Toolkit - Access information about the Toolkit more easily and quickly This README, a supplement to "Using Your Toolkit," contains the following information: - Introduction to the Toolkit - Installing the Toolkit - Updates to CONFIG.SYS - Programming considerations Use a non-proportional font to view this file. _______________________________________________________________________________ INTRODUCTION TO THE TOOLKIT The IBM OS/2 Developer's Toolkit Version 4.5 provides development support for new features in the "OS/2 Warp Server for e-business" operating system and eComStation. The Toolkit helps you develop applications for OS/2 by providing you with: - Header files - Library files - Online documents - Programming tools - Sample application programs _______________________________________________________________________________ INSTALLING THE TOOLKIT This section provides a step-by-step procedure for installing the Toolkit. This Toolkit is a follow-on to previous releases and should not be considered a replacement for any earlier release. DO NOT install this toolkit "over" any previous release. For a first-time installation of this Toolkit, specify an unused target location in the "Destination" field when prompted by the Toolkit installation program. For subsequent (additive) installations of this release (for example, to install components that were not requested during the original installation), the same destination directory may be respecified. There may be Corrective Service Distributions (CSD's) available for this release of the Toolkit. Toolkit CSD's provide a mechanism for updating the components of an existing Toolkit installation. The CSD images are designed to be installed "over" an existing Toolkit of the appropriate release. CSD's for each release are numbered sequentially (from CSD1 to CSDn), and the installation instructions for a particular "numbered" CSD can be found in the "numbered" README file (eg. README.1) included with the CSD package. _______________________________________________________________________________ System Requirements The following is the prerequisite software required: o One of the following versions of the OS/2 operating system: - eComStation 1.0/1.1/1.2.x - OS/2 Warp Server for e-business - OS/2 Warp Version 4 - OS/2 Warp Version 3 - OS/2 Warp with WIN-OS/2 Version 3 - OS/2 Warp Connect - OS/2 Warp Connect with WIN-OS/2 o Various components have additional software requirements. The Toolkit components that you choose to install will function only if the underlying operating system supports the component. Some of the additional requirements include the following: - Open32 samples require the Open32 interfaces (previously known as the IBM Developer API Extensions for OS/2 or DAPIE) - OpenGL samples require OpenGL (also referred to as Enhanced 3D Graphics) - All REXX samples, with the exception of the REXX API samples, require Object REXX Note: The features listed above are available on OS/2 Warp Server for e-business and OS/2 Warp Version 4. If you are using version 3 of the OS/2 operating system, you will need to obtain support for these components either via FixPak 17 or later (for Open32 support), or from the Developer Connection CD (for OpenGL and Object REXX support). o To use the latest level of Universal Language Support, one of the following operating systems is required: - OS/2 Warp Server for e-business - OS/2 Warp Version 4 - OS/2 Warp Version 3 with FixPak 32 or later If you do not have Universal Language Support, you will receive errors when using the NMAKE32, RC, and MKTMPF tools. o The new TCP/IP Toolkit Version 4.21 is also provided, which contains sample programs that take advantage of the new 32-bit TCP/IP interfaces in OS/2 Warp Server for e-business. If you are using an older version of the operating system, these sample programs may fail with the error "SYS1804: The system cannot find the file TCPIP32" if the target machine is not configured with TCP/IP Version 4.1 or newer. Before you install the Toolkit, make sure you have: - A personal computer capable of running OS/2 Warp - A CD-ROM drive - A hard disk drive with at least 90 MB of free disk space (to install the entire Toolkit) We recommend that you use a mouse when installing the Toolkit. If you will be installing the IBM VisualAge C++ 3.0 compiler, please read the following notes: Installing your compiler first and the OS/2 Warp Toolkit last prevents unexpected results due to environment variable changes (automatic updates to CONFIG.SYS). To avoid a downlevel SOM Runtime installed by the VisualAge C++ 3.0 compiler, follow these steps for installation: 1. Start the installation program for VisualAge C++ 3.0. 2. Deselect the OS/2 Warp Toolkit entries in the installation screen and proceed with the installation. 3. After completing the installation of VisualAge C++, but before restarting the system, edit CONFIG.SYS and modify the LIBPATH statement by moving x:\IBMCPP\DLL after y:\OS2\DLL, where x is the drive where the VisualAge C++ compiler is installed and y is the drive where the OS/2 Warp Version 4 operating system files are installed. This prevents the SOM Runtime installed by VisualAge C++ from overriding the SOM Runtime shipped with OS/2 Warp Version 4. 4. Save the modified CONFIG.SYS and restart your system. 5. Install the IBM OS/2 Developer's Toolkit Version 4.5 and restart your system. _______________________________________________________________________________ Installation Program Install all or part of the Toolkit using the Toolkit Installation program (a Presentation Manager/2 (PM) application) on the CD-ROM. Using the Toolkit Installation program, you can install: - Header files - Library files - Online documents - Programming tools - Sample application programs The Toolkit Installation will copy chosen files to your machine and update CONFIG.SYS with respect to the locally installed files. _______________________________________________________________________________ Installation Help To get online help while using the Toolkit Installation program, do one of the following: - Press F1 - Select the Help push button - Choose one of the help choices from the Help menu _______________________________________________________________________________ Installing the Toolkit To install the Toolkit, do the following: 1. Start the Toolkit Installation Program: - If you are installing the Toolkit from the images provided on the OS/2 Warp Server for e-business installation CD, execute the "tkinstal.exe" program located in the "toolkit" subdirectory. - If you are installing the Toolkit from an IBM Developer Toolbox (formerly known as the Developer Connection) CD-ROM and are using the interfaces provide by the Developer Toolbox, follow the instructions provided by that interface. - If you are working directly with the "installation image" of the Toolkit (for example, you have downloaded and unpacked on online version of the toolkit, or you are referencing the subdirectory tree of the installation image as it exists on the CD-ROM), then locate and execute the "tkinstal.exe" program. 2. The IBM OS/2 Developer's Toolkit Version 4.5 Installation window is displayed. Select each component you want to install. Depending on the components you select for installation, additional components might be automatically selected for installation. A plus (+) sign in a box in front of a component indicates that the component has at least one level of subcomponents from which you can select. Select the plus sign in front of the component to expand the list of components. 3. If desired, change the default destination for the selected components by editing the "Destination" field. If the entire Toolkit is not required, components may still be deselected in the usual manner. However, it is important that the paths are not changed from their defaults for all components other than the root, because the directory structure on the CD-ROM cannot be changed. 4. Select Options to specify what updates to your system are required. You can choose to: - Install the selected files. - Register Workplace Shell classes for the components that utilize them. - Create Workplace Shell objects. - Select the file where any CONFIG.SYS updates are to be made, or deselect the "Write CONFIG.SYS updates to:" check box to prevent the Toolkit Installation program from updating CONFIG.SYS. 5. To install all selected components of the Toolkit: a. Select Install. b. Follow the prompts in the message boxes to complete the installation. 6. A message box is displayed indicating successful completion of the installation. 7. To make the changes effective, remove any installation media from the bootable devices, shut down and restart your system. After the Toolkit is installed, the Toolkit folder appears on the Desktop, represented by a toolbox icon. _______________________________________________________________________________ UPDATES TO CONFIG.SYS The Toolkit Installation program adds the paths of all needed environment variables with the appropriate Toolkit path. These variables include BOOKSHELF, DPATH, HELP, and so on. If you choose to make these updates manually, do the following before installing the Toolkit: 1. Select Options from the Toolkit Installation program. 2. Change the file name in the "Write CONFIG.SYS updates to:" field to something other than CONFIG.SYS (for example, CONFIG.001). 3. This file can be compared to your original CONFIG.SYS once the installation is complete. You can then make the appropriate modifications to CONFIG.SYS as you choose. _______________________________________________________________________________ PROGRAMMING CONSIDERATIONS o The OS/2 C libraries provide all of the functions necessary for C development; however, they do not support C++ development. Currently, this support must be provided by a compiler vendor. o If you are using the C Runtime Headers provided with the Toolkit, be sure to link with the C Runtime libraries provided in the LIB directory to prevent link errors. If you are not using the C Runtime libraries, you should not use the C Runtime Headers provided in the Toolkit. o MPTS programming information is included in the TCP/IP Programming Reference. _______________________________________________________________________________ Tools o There are two versions of the Program Maintenance Utility (NMAKE) and of the Resource Compiler (RC). The default versions of these tools are referenced by the names "NMAKE" and "RC" and the "alternate" versions of these tools are referenced by the names "NMAKE32" and "RC16". The differences between these tools are as follows: NMAKE - This is the "old" Program Maintenance Utility. Because of the semantic and syntactic differences between this utility and the "new" version of NMAKE (NMAKE32), the old version has been restored as the default program maintenance utility. This version of NMAKE is documented in the Tools Reference book. NMAKE32 - This is the "Enhanced Program Maintenance Utility". In the previous release of the Toolkit (IBM Developer's Toolkit for OS/2 Warp Version 4) this was the default NMAKE utility, but it has been renamed to NMAKE32 for this release. This version of NMAKE is documented in the file "book\nmake32.inf". RC16 - This is the old "Legacy Resource Compiler". It is included for customers who cannot update their resource scripts to compile with the newer version of RC. This version of RC is documented in the file "book\rc16.inf". RC - This is the "new" Resource Compiler. Where possible, backward compatibility with RC16 is maintained, but the new RC has stricter syntax checking and may issue errors against some resource scripts. This version of RC also contains additional features such as true national language support and a full- featured C-language preprocessor. This version of RC is documented in the Tools Reference book. o If you encounter a trap in LIBUNI.DLL when using Make Template File (MKTMPF) or the Resource Compiler (RC) on an OS/2 Warp Version 3 system, change the SET LANG=ENUS437 statement in CONFIG.SYS to SET LANG=EN_US. _______________________________________________________________________________ VoiceType Developer's Toolkit o The VoiceType Developer's Toolkit online documentation is in HTML format. You need an HTML browser, such as IBM WebExplorer or Netscape Navigator for OS/2 Warp, to view it. _______________________________________________________________________________ _______________________________________________________________________________ TCP/IP o Compiling an application with the BSD 4.3 header files: The 4.3 BSD header files (for TCP/IP versions prior to 4.1) are also included with this Toolkit. To access the header files, define TCPV40HDRS before including (#include) any of the TCP/IP header files. Do this on the command line with the /D switch: icc /DTCPV40HDRS /c myprog.c or in your .c file: #define TCPV40HDRS #include <sys\socket.h> ... To link an application that was compiled with these header files, you must specify so32dll.lib and tcp32dll.lib on the link line: ilink /NOFREEFORMAT myprog,myprog.exe,NULL, so32dll.lib tcp32dll.lib o Update to "Compiling an RPC API Application" Use these steps to compile and link an RPC API application using IBM VisualAge C++ for OS/2: 1. To compile your program, enter: icc /DTCPV40HDRS /C myprog.c 2. To create an executable program, you can enter (on one line): ilink /NOFREEFORMAT myprog,myprog.exe,NULL, rpc32dll.lib so32dll.lib tcp32dll.lib Notes: - The RPC API is not re-entrant. If you are creating a multithreaded program, you must serialize the access to the APIs. - For more information about the compile and link options, and dynamic link libraries, see the user's guide provided with your compiler. - RPC applications must be compiled using the 4.3 BSD API (pre-TCP/IP 4.1 header files). Using the 4.4 header files with an RPC application is not supported. _______________________________________________________________________________ _______________________________________________________________________________ SOM o As of 6/97, IBM no longer supports SOM. _______________________________________________________________________________ Thank you for your continued interest in OS/2. _______________________________________________________________________________ TRADEMARK INFORMATION _____________________ The following terms are trademarks of the IBM Corporation in the United States or other countries or both: ------------------------------------------------------- IBM ------------------------------------------------------- OS/2 ------------------------------------------------------- Presentation Manager ------------------------------------------------------- SOM ------------------------------------------------------- VisualAge ------------------------------------------------------- VoiceType ------------------------------------------------------- WebExplorer ------------------------------------------------------- WIN-OS/2 ------------------------------------------------------- Workplace Shell ------------------------------------------------------- eComStation is a trademark of Serenity Systems International. The following terms are trademarks of other companies: ---------------------------------------------------------------- Netscape Netscape Communications Corporation Netscape Navigator ---------------------------------------------------------------- IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, WARRANTIES OF FITNESS AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY RELATED PATENTS OR COPYRIGHTS. Copyright IBM Corporation, 2001, all rights reserved. _______________________________________________________________________________ END-OF-README-FILE _______________________________________________________________________________
Comments
