IBM Networks Coordinated Logon Client for Windows NT
작성일: 2004/01/22 17:48:49
작성자: 마드모아
IBM Networks Coordinated Logon Client for Windows NT
인데..아마 엔티4.0 윈2000까지 가능할꺼 같습니다..
XP이후는 않될거같습니다..
즉 엔티를 OS/2에서 관리하는것이죠..벌써 2000나오기전에
액티브디렉토리를지원하는것이죠...
-------------------------------------------------------
IBM Networks Coordinated Logon Client for Windows NT Page 1 of 5
________________________________________________________________________
Table of Contents
_______________________________
1.0 Introduction .................................................Page 1
2.0 Prerequisites ................................................Page 1
3.0 Installation .................................................Page 2
3.1 Installing from Diskette .................................Page 2
3.2 Installing Windows NT Service Pack .......................Page 3
4.0 Up and Running ...............................................Page 3
4.1 Coordinating the User Accounts ...........................Page 3
4.2 Logging On ...............................................Page 3
4.3 Starting the Graphical User Interface ....................Page 4
4.4 Displaying the Users Guide ...............................Page 4
4.5 Keeping Your Password Synchronized .......................Page 4
5.0 Uninstall ....................................................Page 5
----------------
1.0 Introduction
----------------
Welcome to the IBM Networks Coordinated Logon Client for Windows NT
(hereinafter called IBM Networks Client). IBM Networks Client is an
add on to the Microsoft Windows NT Network function. It provides
your Windows NT system with all of the IBM OS/2 Warp Server
functions, such as:
* Connecting to home directories
* Setting up and connecting to logon assignments
* Running shared applications
* Connecting to aliases
* Checking DASD limits
IBM Networks Client performs a secondary logon validation to an
IBM OS/2 Warp Server domain after Windows NT successfully logs on.
Your home directory and logon assignments are automatically connected.
-----------------
2.0 Prerequisites
-----------------
You must have the following prerequisite components installed on
your system before you can install IBM Networks Client:
* The Microsoft Workstation service
* An appropriate network adapter device driver
* A supported protocol (either NetBEUI or TCP/IP)
IBM Networks Coordinated Logon Client for Windows NT Page 2 of 5
________________________________________________________________________
To verify that you have the prerequisite components installed:
1. Click Start button, point to Settings, and then click
Control Panel.
2. Double-click Network.
3. From the Services and Protocols tabs you can view the
components that are currently installed.
-----------------
3.0 Installation
-----------------
3.1 Installing from Diskette
To install from diskette:
1. Log on to the system as a user with Administrator privilege.
2. Click Start button, point to Settings, and then click
Control Panel.
3. Double-click Network. The Network notebook is displayed.
4. Click the Services tab.
5. Click Add... button. The Select Network Service window is
displayed.
6. Click Have Disk... button. The Insert Disk window is
displayed.
7. Insert the IBM Networks Coordinated Logon Client for Windows
NT diskette into the A: drive, and then click OK. The OEM
Option window is displayed.
8. Select IBM Networks Coordinated Logon Client for Windows NT,
and then click OK. The IBM Networks Client Properties
notebook is displayed, after the files are copied.
9. Click the General tab.
10. In the Domain name box, type the name of the default logon
IBM OS/2 Warp Server domain.
11. In the Alternate domain name box, if you want to use an
alternate domain, type the name of the alternate domain.
12. Click the Advanced tab.
13. If you select the button to allow the domain to determine
which server will validate your logon, you may change the
Logon Broadcast Attempts and Logon Broadcast Wait settings.
14. If you select the button to specify the name of your logon
server, you must enter the name of the logon server.
15. Click OK. The Network notebook is displayed.
16. Click Close. The Network Settings Change window is
displayed.
17. Click Yes to restart your system.
IBM Networks Coordinated Logon Client for Windows NT Page 3 of 5
________________________________________________________________________
3.2 Installing Windows NT Service Pack
Before you install a Windows NT service pack on top of a
workstation that has the IBM Networks Client currently
installed, do the following:
1. Uninstall the IBM Networks Client.
2. Install the service pack on Windows NT.
3. Install the IBM Networks Client.
------------------
4.0 Up and Running
------------------
4.1 Coordinating the User Accounts
Your Windows NT user account and your IBM OS/2 Warp Server domain
user account must be synchronized. You must have a Windows NT
user account whose username and password also exist in a IBM OS/2
Warp Server domain. To coordinate the user accounts do one of
the following:
o If you have a Windows NT user account with a username that is
the same as your IBM Warp Server domain account username, then
you must change the password on your Windows NT account to be
the same as your password on the IBM Warp Server domain user
account.
o If you DO NOT have a Windows NT user account with a username
that is the same as your IBM Warp Server domain account
username, then you must create one. Use the Windows NT User
Manager utility to create your Windows NT account.
4.2 Logging On
To logon:
1. After completing the installation process, restart your
Windows NT session. The logon window is displayed.
2. Type your network password.
3. Click OK to begin validation of your IBM Networks Client
logon.
IBM Networks Coordinated Logon Client for Windows NT Page 4 of 5
________________________________________________________________________
4.3 Starting the Graphical User Interface
To start the graphical user interface:
1. Click Start button, and then click Programs.
2. Click IBM Networks Client.
3. Click IBM Networks Client.
Note: To view and connect network resources, use the IBM
Neighborhood Browser Enabler for OS/2 Warp Server.
4.4 Displaying the Users Guide
To view the Users Guide:
1. Click Start button, point to Programs, and then click
IBM Networks Client.
2. Click IBM Networks Client Users Guide.
4.5 Keeping Your Password Synchronized
To change your password:
1. Log on to the Windows NT workstation.
2. From the Windows NT desktop, press CTRL+ALT+DEL. The
Windows NT Security window is displayed.
3. Click Change Password. The Change Password window is
displayed.
4. Type your old password, new password and confirm new
password.
5. Click OK.
6. Your password will be updated on Windows NT and then on the
IBM OS/2 Warp Server domain.
IBM Networks Coordinated Logon Client for Windows NT Page 5 of 5
________________________________________________________________________
-------------
5.0 Uninstall
-------------
To uninstall:
1. Log on to the system as a user with administrator privilege.
2. Click Start button, point to Settings, and then click
Control Panel.
3. Double-click Network. The Network notebook is displayed.
4. Click Services tab.
5. From the Network Services list, click IBM Networks Coordinated
Logon Client.
6. Click Remove.
7. Click Yes.
8. Click Close.
9. Restart your system.
10. Log on to the system as a user with administrator privilege to
complete the update of Registry entries and the removal of the
IBM Networks Client files.
END OF DOCUMENT.
Comments
