[프로그램] CD Maker (1996년판)

다소 좀 오래 되었습니다.

---
          Install Notes for Unite CD-Maker V2.1a-M
                   Cirrus Technology, Inc.
        (C) Copyright Cirrus Technology, Inc., 1996


Contents
--------
This document contains important information regarding the
installation and operation of Unite CD-Maker.  It is
recommended that this entire document be read prior to
installing this software.

                * What is Unite CD-Maker?
                * Installation Requirements
                * Installation Procedures
                * How to update your CONFIG.SYS if you
                  didn't select the "Update CONFIG.SYS" option
                  during installation
                * New Features
                * Demonstration Version's Limitation

What is Unite CD-Maker?
---------------------
Cirrus Technology's Unite CD-Maker software is a complete software
package for creating your own custom audio CDs and CD-ROMs (data
CDs).  It was developed using IBM's state-of-the-art System Object
Model (SOM), Workplace Shell, and OpenClass technology.  CD-recordable
discs can hold in excess of 650 MB of data or 74 minutes of music
and are readable by virtually any DOS, Windows, OS/2, or UNIX system
with a CD-ROM drive.  With Unite CD-Maker, you can simply and easily
create custom audio CDs by combining songs from several CDs onto
one CD.  You can create CD-ROMs for backup, archiving, and distribution
of personal computer data.

Even if you don't have a CD-recordable device, Unite CD-Maker lets
you simulate the burn process by using its enhanced CD Burner icon!
Install this demonstration version of Unite CD-Maker today, and find
out more about this exciting, new technology!

Installation Requirements
--------------------
In order to run the UNITE INSTALL program, your system must meet the
following criteria:

DISK DRIVE.  There must be at least 3 megabytes of available disk
space on the hard disk on which Unite CD-Maker will be installed.

OPERATING SYSTEM.  IBM OS/2 WARP Version 3.0 or greater must be
installed and running on your PC.

OS/2 CD-ROM SUPPORT.  If your PC does not have OS/2
CD-ROM support installed, use OS/2's selective install procedure to
install CD-ROM support.  Refer to your OS/2 documentation for more
information.  After OS/2's CD-ROM support is installed, Unite CD-Maker
can be installed.
  
Installation Procedures
-------------------
The INSTALL program will create all necessary directories and update
CONFIG.SYS as noted below.  

Follow the steps below to initially run the INSTALL program;

1) Invoke an OS/2 FULL SCREEN session.

2) UNZIP the file CDMAKER.ZIP into a temporary directory, and
   Set your current default directory to this temporary directory.

    i.e., PKUNZIP2 CDMAKER.ZIP

3) Type INSTALL and press the ENTER key.

4) The first install window displays the CDMAKER.TXT file.  Review its
   contents and click on the Continue pushbutton.

5) Select Update CONFIG.SYS from the second install window.  If this
   option is not selected, CONFIG.SYS must be manually updated.

6) If this is an initial install, the second selection option, Overwrite
   files, may be left unchecked.  If you are reinstalling the software,
   check the Overwrite files option.

7) Click on the OK pushbutton.

8) Select the "Unite CD-Maker" as the component you wish to install.

9) Before selecting to continue the install, review the install directory
   provided on the lower portion of the Install - directories window.  
   This is the directory into which the software will be installed.
   As shown, the default drive is "C", the default directory is "UNITE".

10) After reviewing and modifying, if required, the directory path;
     select the Install... pushbutton to continue the installation.

11) You are informed when the installation has completed.

12) Reboot your PC immediately after installation.

NOTE:  The files in the temporary directory (see Step #2) can be
deleted after successful installation of Unite CD-Maker.

How to update your CONFIG.SYS if you didn't select the
"Update CONFIG.SYS" option during installation                                
---------------------------------------------
If you didn't select the Update CONFIG.SYS option during installation,
you need to manually update your CONFIG.SYS file.  Follow the
instructions below to manually update your CONFIG.SYS file.

NOTE:  The examples below reflect the default installation drive
and directory (C:\UNITE).

1) LIBPATH must be modified as follows:

   The location of the Unite CD-Maker libraries must be added
   as the FIRST entry of the LIBPATH statement as follows:

   i.e., LIBPATH=C:\UNITE\LIB;

   The location into which the SOM libraries are installed must
   be added immediately after the above LIBPATH entry.

   i.e., LIBPATH=C:\UNITE\LIB;C:\UNITE\SOM30;....

2) PATH must be modified as follows:

   The location of the Unite CD-Maker executables must be added
   as the FIRST entry for the PATH.

   i.e., SET PATH=C:\UNITE\BIN;

3) The following line must be at the END of the CONFIG.SYS file:

   i.e., SET CIRCFGPATH=C:\UNITE

4) All device drivers provided by Cirrus Technology are installed into the
   C:\UNITE\BIN directory.  The CONFIG.SYS must be modified as follows
   to load the device drivers during boot:

   i.e., BASEDEV=CTCDRFLT.FLT
        REM the driver below replaces OS2CDROM.DMD /Q
        DEVICE=C:\UNITE\BIN\CTCDROM.DMD /Q

5) After these modifications are made to your CONFIG.SYS file, reboot
   your PC prior to using the software.

New Features
------------
1)  Support for the Ricoh RS-1420C CD-recordable device.

2)  Support for the Sony CDU-924S CD-recordable device.

3)  Support for the Smart & Friendly CD-R 2004 CD-recordable
    device.

4)  Multisession support for most CD-R drives.  Previously, unless
    you had a Sony CD-R device, the only session that was accessible
    from a CD-ROM/XA multisession disc was the first.  Now, Unite
    CD-Maker gives you the ability to select any session on a
    CD-ROM/XA multisession disc to be recognized as the primary
    CD-ROM volume in the drive.

5)  The Unite CD-Maker documentation is now available on-line!  The
    installation of Unite CD-Maker places an icon titled "Help" in
    your Unite CD-Maker desktop folder.  Use it to access Unite
    CD-Maker's on-line documentation.

6)  If you do not have a CD-recordable device attached to your PC,
    you can now simulate the burn process using the enhanced CD
    Burner icon.  The CD Burner icon has been enhanced to simulate
    the burn process even though you might not have a CD-recordable
    device attached to your PC.

Facts
-----
1) The HP 4020i CD-recorder is commonly bundled with an ADVANSYS SCSI
   host adapter (ADVANSYS APB-510).  This adapter is not distributed
   with a driver for OS/2.  If you plan to use this adapter to control
   your HP 4020i, you will need to manually install the driver as
   follows:

       a)  Copy the file ASC.ADD from the \UNITE\BIN directory to the
           \OS2\BOOT directory.

       b)  Edit the CONFIG.SYS file, and add the entry:
           BASEDEV=ASC.ADD.

       c)  Reboot your PC.

2) Unite CD-Maker is multi-threaded software.  Setting
   "PRIORITY=ABSOLUTE" in the CONFIG.SYS file forces all priority
   to a single thread.  Unite CD-Maker will NOT operate in this
   environment.  If a priority statement exists in the CONFIG.SYS, it
   MUST be set to "DYNAMIC".

Demonstration Version's Limitation
-----------------------------
This is a fully functional version of Unite CD-Maker created
specifically to be installed with IBM OS/2 Warp 3.0 or greater.
This demonstration version is restricted in that only a limited
amount of data can be burned to a CD.  To upgrade this demonstration
version of Unite CD-Maker, please call Cirrus Technology on
(301) 698-1900.

This demonstration version of Unite CD-Maker is restricted in its
BURN capacity in two aspects.

  1)  Only 100 megabytes of DATA can be burned to a CD.

  2)  Only 11 minutes of AUDIO can be burned to a CD.

NOTE:  Burned disks which are kept open (allow future sessions)
can be reused after upgrading to the commercial version
of Unite CD-Maker.  For information and to upgrade Unite
CD-Maker, contact Cirrus Technology:

        Phone:  (301) 698-1900
        Fax:  (301) 698-1909
        CompuServe:  GO UNITE
        Internet:  http://www.cirunite.com

The Unite CD-Maker documentation is on-line and can be found
by clicking on the "Help" icon in the Unite CD-Maker folder.

The Unite CD-Maker licensing agreement can be found in the
ASCII text file, LICENSE.TXT.  Please review this agreement
carefully.
_________________________________________________________________________
Unite CD-Maker runs under a graphical environment called Presentation
Manager, created by International Business Machines Corporation and
Microsoft Corporation.

To use Unite CD-Maker under OS/2 Presentation Manager, you need to
license and install IBM's OS/2 WARP Version 3.0 or higher.

Some product names have been used for identification only and may be
trademarks of their respective companies.